Perkins 1106D Disassembly And Assembly page 137

SENR9983
Illustration 282
9. Tighten the setscrews (8) and the nuts (10) to a
torque of 22 N·m (16 lb ft). Tighten the fasteners
in the sequence that is shown in Illustration 282.
Illustration 283
10. Tighten the remaining setscrews to a torque of
22 N·m (16 lb ft). Tighten the setscrews in the
sequence that is shown in Illustration 283.
11. Use Tooling (A) to tighten the torx screws to a
torque of 22 N·m (16 lb ft). Refer to Illustration 281.
12. Install a new O-ring seal (6) to the drain plug
(5). Install the drain plug (5) to the engine oil pan
(7). Tighten the drain plug to a torque of 34 N·m
(25 lb ft).
Disassembly and Assembly Section
137
g01212463
g01212464