Perkins 1106D Disassembly And Assembly page 132

132
Disassembly and Assembly Section
Illustration 273
1. Install Tooling (B) to positions (X) in the cylinder
block.
2. If necessary, follow Steps 2.a through 2.f in order
to install the isolating frame.
a. Ensure that the joint face of the cylinder block
is clean and free from damage.
b. Ensure that the isolating frame is clean and
free from damage. If necessary, replace the
isolating frame.
g01215700
Illustration 274
Tooling (B) is not shown for clarity.
c. Apply a bead of Tooling (C) to positions (Y).
Illustration 275
SENR9983
g01215533
g01176954