Perkins 1106D Disassembly And Assembly page 102

102
Disassembly and Assembly Section
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened
component life.
Illustration 201
Breather tool
1. To remove the breather body, Tooling (A) must be
used. The tool should be fabricated from 3.1 mm
(1/8 inch) steel stock. The dimensions for the tool
are given in Illustration 201. All dimensions are
shown in millimeters.
Illustration 202
g01206039
Illustration 203
2. Loosen the two clamps (11) and remove the hose
(12) from the cover (1) and from the tube (13).
SENR9983
g01200785
g01200791