Changing The Paper Size In The Wide Large Capacity Tray - Ricoh pro c901 Troubleshooting Manual

2. Adding Paper, Toner, Staples, Rings and Glue
2. Fasten the end fence using the screw provided.
2
• When loading index tabs, shift the end fence for A4 , 8
the end fence for index tabs.

Changing the Paper Size in the Wide Large Capacity Tray

This section explains how to change the paper size in the Wide LCT.
• If a paper tray is pushed vigorously when putting it back into place, the position of the tray's side
fences may slip out of place.
• Check that the paper edges are aligned with the left side.
• Do not stack paper over the limit mark.
1. Carefully pull out the paper tray until it stops.
1. Paper transfer unit
Do not open the paper transfer unit when the paper tray is in use, or a misfeed might occur.
66
CAL058
1
/ " × 11" to position
2
CAL082
before setting