The Groomer Reel - Toro Greensmaster 3120 Service Manual

The Groomer Reel

Removing the Groomer Reel
Greensmaster 3120
17230SL Rev C
g228732
1. Shaft clamp (4 each)
2. Jam nut (4 each)
Remove the groomer reel to replace individual groomer blades or replace the
shaft. The groomer reel can be reversed to provide additional blade life.
1. Park the machine on a clean and level surface, lower the cutting units
completely to the ground, set the parking brake, and remove the key from the
key switch.
Contact with the reel or other cutting unit parts can result in personal
injury.
Use heavy gloves when handling the groomer reel.
2. Carefully remove the 4 jam nuts, 4 bolts, and 4 shaft clamps that secure the
groomer reel to the output and stub shafts.
3. Lift the groomer reel from the cutting unit.
4. Inspect the shields, stub shaft, driven shaft and shaft bearings for wear or
damage and replace components as necessary; refer to
Assembly (page 9–6)
Figure 153
3. Bolt (4 each)
4. Groomer reel
CAUTION
and The Idler Assembly (page
Page 9–13 Universal Groomer (Optional): Service and Repairs
The Gear Box
9–11).