Specifications; Belt Driven Groomer (Optional) - Toro Greensmaster 3120 Service Manual

Specifications

Belt Driven Groomer (Optional)

Belt Driven Groomer (Optional): Specifications
Item
Grooming reel diameter
Groomer blade type
Groomer mounting
Groomer height setting
Width-of-groomer
Height adjustment knob
Quick-up feature
Groomer drive
6 cm (2.375 inches)
Spring Steel: 42 steel blades with 1/2 inch
blade spacing.
Carbide: 42 steel blades with 1/2 inch blade
spacing.
Thin blade: 82 steel blades with 1/4 inch
blade spacing.
A soft or stiff groomer brush can be installed in
place of the grooming reel.
The groomer is mounted to the cutting unit side
plates. The drive assembly for the grooming
reel is located on the opposite side of the
cutting unit from the hydraulic cutting reel
motor.
Mowing: 0.8 to 15.7 mm (0.030 to 0.620 inch).
HOC range: 1.5 to 19.1 mm (0.060 to 0.750
inch).
49.2 cm (19.38 inches).
Allows a 0.003 inch (0.08 mm) increment of
height adjustment for each click of the adjuster.
Allows grooming reel to be raised above the
height/depth adjustment for no grooming reel
action while mowing.
The groomer drive assembly is attached to the
right side of the cutting unit.
Page 8–2
Description
Greensmaster 3120
17230SL Rev C