High Flow Hydraulic Filter Kit - Toro Greensmaster 3120 Service Manual

High Flow Hydraulic Filter Kit

Greensmaster 3120
17230SL Rev C
Toro Part Number: TOR6011
The high flow hydraulic filter kit is designed with
large flow (150 L/minute or 40 gallons/minute)
and high pressure (34,500 kPa or 5,000
psi) capabilities. This kit provides for
bi-directional filtration which prevents filtered
unwanted material from entering into the circuit
regardless of the flow direction.
If a component failure occurs in the closed
loop traction circuit, contamination from the
damaged part will remain in the circuit until you
remove it. Install a high flow hydraulic-fluid
filter into the circuit when you connect the
hydraulic test gauges in order to test the
traction circuit components or after you replace
a failed traction circuit component (e.g., piston
pump or wheel motor). This filter removes
contamination from the hydraulic fluid in the
traction circuit, thereby preventing additional
component damage.
Note: This kit does not include the hydraulic
hoses; refer to Hydraulic Hose Kit (page
Note: The replacement filter element is Toro
Part No. TOR6012. The filter element canister
tightening torque is 34 N∙m (25 ft-lb).
4–28).
Page 4–29 Hydraulic System: Special Tools