Toro Greensmaster 3120 Service Manual page 15

While Operating the Machine (continued)
Greensmaster 3120
17230SL Rev C
A. Make sure the cutting units are disengaged.
B. Verify that function control lever is in neutral.
C. Set the parking brake.
D. Lower the cutting units to the ground.
E. Stop the engine and remove key from ignition switch.
12. Whenever machine is left unattended, make sure cutting units are fully raised
and reels are not spinning, the key is removed from ignition switch and the
parking brake is set.
Page 1–5 Safety: Safety Instructions