Toro Greensmaster 3120 Service Manual page 163

Assembling the Reel Motor (continued)
Greensmaster 3120
17230SL Rev C
15. Place the front flange of the motor into a vise with soft jaws and alternately
torque the cap screws 25 N−m (18 ft−lb).
16. Remove the motor from the vise.
17. Place a small amount of clean hydraulic fluid in the inlet of the motor and
rotate the drive shaft away from the inlet one revolution. If any binding is
evident, disassemble the motor and check for assembly problems.
Page 4–117 Hydraulic System: Service and Repairs