Toro Greensmaster 3120 Service Manual page 142

g217967
1. Manifold assembly
2. Hydraulic hose, lift cylinder #1 rod
end
3. Straight fitting (2 each)
4. Hydraulic tube, from reel motor #1 13.
5. Elbow fitting
6. Hydraulic tube, to reel motor #2
7. Cap screw (2 each)
8. Hydraulic hose, from gear pump P2 17.
9. Elbow fitting
Hydraulic System: Service and Repairs
(early machines with backlap)
10. Hydraulic hose, to charge filter
11. Elbow fitting (2 each)
12. Hydraulic hose, from steering
control valve T port
Hydraulic hose, lift cylinder #3 rod
end
14. Elbow fitting
15. Hydraulic hose, lift cylinder #3 cap
end
16. Hydraulic hose, from steering
control valve E port
Elbow fitting
18. Elbow fitting (3 each)
The ports on the manifold are marked for easy identification of components.
Example: FC1 is the cutting unit circuit flow control valve and P1 is the gear
pump connection port; refer to the
the function of the connections and the cartridge valves at each port location).
Figure 61
19.
20.
21.
22.
23.
24.
25.
26.
Hydraulic Schematics (page 4–13)
Page 4–96
Hydraulic hose, lift cylinder #1 cap
end
Hydraulic tube, to return filter
Elbow fitting
Hydraulic hose, lift cylinder #2 rod
end
Hydraulic hose, lift cylinder #2 cap
end
Swivel tee fitting (add for testing)
Test connector (add for testing)
Cap
to identify
Greensmaster 3120
17230SL Rev C