Toro Greensmaster 3120 Service Manual page 256

Installing the Bedknife (continued)
DPA Cutting Units: Service and Repairs
Do not use an impact wrench to tighten screws into the bedbar.
3. Use new screws to secure bedknife to bedbar. Apply anti-seize lubricant to
the threads of new screws. Do not apply anti-seize lubricant to the taper
of the screw heads.
4. Install all screws but do not tighten.
5. Using a torque wrench and bedknife screw tool, tighten the 2 outer screws
to 1 N-m (10 in-lb).
6. Working from the center of the bedknife toward each end, tighten screws
from 23 to 28 N-m (200 to 250 in-lb).
7. After installing the bedknife to bedbar, grind the bedknife.
IMPORTANT
Page 7–20 Greensmaster 3120
17230SL Rev C