Glp Report - A&D BM series Instruction Manual

GLP Report

11.2.
To output the GLP/GMP compliant report to an AD-8121B printer, AD-8126 printer, AD- 8127
printer or to a personal computer, set the "GLP output (
" " (AD-8121 format), "
1
format using the external device clock data).
Notes on outputting the GLP/GMP compliant report to a printer
Refer to "16.2. Connecting to Peripheral Equipment" for connection to a printer.
With an AD-8121B printer, use MODE 3. If MODE1 is used, select temporarily the dump print mode
by pressing the
STAT.
With an AD-8127 printer, use the dump printing mode.
If the external key printing mode is used, press and hold the
approx. 2 seconds) to switch between the external key printing mode and the dump printing mode.
If the time and date are not correct when the balance built-in clock data is output (info 1, 2), set the
correct time and date in "Clock (
"info 3" is available for balances with software version 1.660 or later.
Calibration report using the internal mass
Key operation
1 Press the
CAL
2 If GLP output is used,
3 The balance returns to the weighing mode.
Function setting "info 1"
AD-8121 format
===========A=&=D
MODEL=====BM-300
S/N=====01234567
ID======LAB-0123
DATE==2011/02/20
TIME====12:34:56
CALIBRATED(INT.)
SIGNATURE
---------------
Space, ASCII 20h
<TERM> Terminator, CR , LF or CR
CR Carriage return, ASCII 0Dh
LF Line feed, ASCII 0Ah
BM series
" (General format using the balance built-in clock data) or "
2
key of the AD-8121B printer.
)" of the function table.
Cl adj
key to display
Cal in
is displayed and the calibration report is output.
glp
Manufacturer
Serial number
ID number
Calibration type
Signature
info
ENT
. The balance performs calibration using the internal mass.
Model
Date
Time
59
)" parameter of the function table to
key of the AD-8127 printer (for
Function setting "info 2"
General format using the balance built-in clock data
" (General
3