Description Of The Class "Environment, Display - A&D BM series Instruction Manual

Class Item and Parameter
t-Up
5if
Timeout
Serial
erCd
interface
AK, Error code
d5 fnc
ldin
Density
Liquid density input
function
Unit
Unit
C5 in
Internal mass correction
id
ID number setting
ion
Neutralization time
ionfnc
8922
Ionizer
AD8922A control
function
e-5
External control input
door
d-dt
Door sensor
Door sensor
function
locfnc
pa55
Password
Password function
function
loc no.
Password
#4 Only "Not used (0)" and "Used (1)" are available for balances with software version 1.50 to 1.64.
All the parameters are available for balances with software version 1.660 or later.
#5 Available for balances with software version 1.660 or later.
For balances with software version 1.50 to 1.64, only the password input by the administrator is
available.

Description of the Class "Environment, Display"

10.3.
Condition ( Cond )
Cond 0 This parameter is for sensitive response to the fluctuation of a mass value. Used for
powder target weighing, weighing a very light sample or when quick response weighing
is required. After setting, the balance displays
Cond 2
This parameter is for stable weighing with slow response. Used to prevent a weight
value from drifting due to vibration or drafts. After setting, the balance displays
Note In automatic response adjustment, this parameter is selected automatically.
BM series
off No limit
on 1 second
off No output
on Output
0 Water temperature
1 Liquid density
Refer to "5. Weighing Units".
Displayed only when the internal mass value correction
switch is set to 1. Refer to "8. Calibration ".
Refer to "11. ID Number and GLP Report".
0 3 seconds
1 10 seconds
2 Manual operation (max. 10 min.)
off The
ION
on Assigns the
0 Assigns the
1 Assigns the
2 Assigns the
off Not used
on Used
0 Not used
#4
1 Used (Limits weighing operations)
2 Used (Allows basic weighing)
Password input by the administrator
ADM
IN
Password input by user 1
U5eR 01

Password input by user 10
U5eR 10
: Factory settings.
Description
Selects the wait time to receive
a command.
AK: ASCII code 06h
Available only when density
mode is selected
key is not used.
key to the
ION MODE
key and
PRINT
key and
PRINT
key and
ION RE-ZERO

.
FAST
49
Refer to "6.5. Ionizer" ".
key on AD-8922A.
key.
RE-ZERO
key.
ION
key.
Refer to "6.1. Basic Operation"
Refer to "15. Password
Function".
#5
.
SLOW