Precautions After Use; Precautions For Power Supply - A&D BM series Instruction Manual

Press the
RE-ZERO
errors.
Keep the balance interior free of foreign matter (dust, liquid or metal
fragments).

Precautions After Use

3.4.
Avoid mechanical shock to your balance.
Do not disassemble the balance. Contact your local A&D dealer if your balance needs service
or repair.
Do not use solvents to clean the balance. For best cleaning, wipe with a dry lint free cloth or a
lint free cloth that is moistened with warm water and a mild detergent.
Keep the balance interior free of foreign matter (dust, liquid or metal fragments).

Precautions for Power Supply

3.5.
Do not remove the AC adapter while the internal mass is in motion, for example, right after the
AC adapter is connected, or during calibration using the internal mass.
If the AC adapter is removed under the conditions described above, the internal mass will be
left unsecured, that may cause mechanical damage when the balance is moved.
Before removing the AC adapter, press the
the weighing mode.
After connecting the AC adapter to the balance, warm up the balance for at least one hour
before weighing.
When the AC adapter is connected, the balance is in the standby mode if the standby indicator
is on. This is a normal state and does not harm the balance. For accurate weighing, we
recommend that the AC adapter be kept connected, especially for the BM-20 and BM-22.
key before each weighing to prevent possible
key and confirm that zero is displayed in
ON:OFF
16 BM series