Balance Software Version 1.660 Or Later - A&D BM series Instruction Manual

Balance Software Version 1.660 or later

15.2.
Three settings are available in "Password function (LocFnc) " of the function table.
No password function.
pA55 0
Entering a password is required before starting weighing.
pA55 1
Logging in by the administrator password is required before making changes.
pA55 2
pA55 0 (No password function)
No password is required. Anybody can perform weighing, use all the balance functions and make
changes to them.
pA55 1 (Entering a password is required before starting weighing.)
The administrator (ADMIN ) sets unique passwords to restrict balance users. Pressing the
key before weighing will prompt you to enter a password.
ON:OFF
The correct password must be entered for the balance to enter the weighing mode.
Two login levels are available: administrator (ADMIN ) and user (U5ER 01 to 10).
Administrator (ADMIN)
User (U5ER 01 to 10)
No password
pA55 2 (Logging in by the administrator password is required before making changes.)
Anybody can perform weighing, but initialization and changes to the settings are restricted,
including the clock setting. Even if the
will not be required.
Two login levels are available: administrator (ADMIN ) and guest (GUE5t).
Administrator (ADMIN)
Guest (GUE5t)
*No password
When weighing is started by pressing the
the standby mode, the balance will prompt you to enter the administrator password.
Items restricted depending on the login level
Login level
Administrator
(ADMIN)
User
(U5ER 01 to 10)
Guest
(GUE5t)
*1: Response adjustment, repeatability test, function switch and initialization, function settings
(clock setting)
*2: Available under ordinary circumstances, but not available to users and guests when the
administrator sets the function switch to "inhibit".
All the functions and settings can be used.
A password can be set for each of 10 users.
Initialization and changes to the settings are restricted,
including the clock setting.
The balance cannot be used.
All the functions and settings can be used.
Initialization and changes to the settings are restricted,
including the clock setting.
Entering password
before weighing
Required
Not required
key is pressed to start weighing, a password
ON:OFF
key while holding down the
ON:OFF
Weighing
Calibration Changes to the settings *1
Available Available
Available or
Not available
not available
*2
76
key in
CAL
BM series