Manual Response Adjustment - A&D BM series Instruction Manual

Manual Response Adjustment

7.2.
1 Press and hold the
until
RESPONSE
Press the
MODE
2 Select a setting for the response adjustment using the
key. Either
MODE
selected.
3 The balance displays
mode and displays the updated response indicator for
about thirty seconds.
Notes
When the response adjustment is selected, the
"Condition (
Cond
Display (
ba5fnc
changed accordingly as shown below.
Display
Cond(Condition)
FAST
MID.
SLOW
The response adjustment setting can be changed
by the "Condition
"Environment, Display (
table. For details, refer to "10. Function Table".
BM series
key (for approx. 2 seconds)
MODE
is displayed, then release the key.
key again immediately.
, or
FAST MID.
, returns to the weighing
1end1
)" parameter of "Environment,
)" in the function table will be
0
1
2
( )"
Cond
)" in the function
ba5fnc
can be
SLOW
parameter of
35
Press and hold
(approx. 2 seconds)
Release and
press again immediately
Select a parameter
Release and wait
Result