A&D BM series Instruction Manual page 50

Class Item and Parameter
int
Interval time
d-no
Data number output
5-td
Time/Date output
dout
Data output
5-id
ID number output
pU5e
Data output pause
at-f
Auto feed
info
GLP output
ar-d
Zero after output
5-tp
Temperature output
bp5
Baud rate
btpr
5if
Data bit, parity bit
Serial
interface
Crlf
Terminator
type
Data format
Caution The balance may not transmit the data completely at the specified refresh rate, depending
on the baud rate or data added to the weighing data such as time, date and ID number.
0 Every measurement
1 2 seconds
2 5 seconds
3 10 seconds
4 30 seconds
5 1 minute
6 2 minutes
7 5 minutes
8 10 minutes
off No output
on Output
0 No output
1 Time only
2 Date only
3 Time and date
off No output
on Output
off No pause
on Pause (1.6 seconds)
off Not used
on Used
0 No output
1 AD-8121 format
2 General (balance clock data)
3 General (external device clock data) #3
off Not used
on Used
off Not output
on Output
0 600 bps
1 1200 bps
2 2400 bps
3 4800 bps
4 9600 bps
5 19200 bps
0 7 bits, even
1 7 bits, odd
2 8 bits, none
0 CR LF
1 CR
0 A&D standard format
1 DP format
2 KF format
3 MT format
4 NU format
5 CSV format
: Factory settings.
48
Description
Interval time in the interval
memory mode when using
prt 3, , data 1
Refer to "12. Data Memory"
Selects whether or not the time or
date is added to the weighting
data. Refer to "10.7. Clock and
Calendar Function" for details.
Selects whether or not the ID
number is output.
Selects the data output interval.
Selects whether or not automatic
feed is performed.
Refer to "11. ID Number and
GLP Report" for details.
#3 Available for balances with software
version 1.660 or later.
Adjusts zero automatically after
data is output
Adds temperature to data output
CR: ASCII code 0Dh
LF: ASCII code 0Ah
Refer to "10.5. Description of
the Item "Data Format" ".
BM series