A&D BM series Instruction Manual page 66

Title block and end block
When the weight values are recorded as GLP data, a "Title block" is inserted at the beginning and
an "End block" is inserted at the end of a group of weight values in the GLP report.
Notes
To output the report to an AD-8121B printer, use MODE 3. If MODE1 is used, select
temporarily the dump print mode by pressing the
If the data memory function is used (except
cannot be output.
Key operation
1 With the weighing data displayed, press and hold the
is displayed, then release the key. The "Title block" is output.
5tart
2 The weighing data is output according to the parameter setting of the data output mode (
the function table.
3 Press and hold the
release the key. The "End block" is output.
Function setting "info 1"
AD-8121 printer format
-----------A-&-D
MODEL-----BM-300
S/N-----01234567
ID------LAB-0123
DATE--2011/02/20
START
TIME----12:34:56
WT--+123.4567--g
WT--+123.4612--g
WT--+123.4623--g
WT--+123.4634--g
WT--+123.4511--g
WT--+123.4534--g
WT--+123.4712--g
WT--+123.4645--g
END
TIME----12:40
15
SIGNATURE
---------------
Space, ASCII 20h
<TERM> Terminator, CR , LF or CR
CR Carriage return, ASCII 0Dh
LF Line feed, ASCII 0Ah
key (for approx. 2 seconds) until
PRINT
Title block
Manufacturer
Model
Serial number
ID number
Date
Time
Weighing data
Time
Signature
End block
key of the AD-8121B printer.
STAT.
), the "Title block" and "End block"
data 0
key (for approx. 2 seconds) until
PRINT
recend
Function setting "info 2"
General format using the balance built-in clock data
64
) of
prt
is displayed, and then
BM series