A&D BM series Instruction Manual page 93

Command Examples
16.3.4.
This example uses "
ON command (turning the display on)
Computer
ON command
R command (Re-zeroing the display)
Computer
R command
CAL command (Calibration with internal mass)
Computer
CAL command
BM series
" of " " so that the <AK> (06h) code is output.
erCd on 5if
Time
All segments
Time
Time
Balance
Standby mode
Command received
All segments are displayed
Command completed
Zero display
Balance
Weighing mode
Command received
In process
Command completed
Zero display
Balance
Zero display
Command received
Command completed
Zero display
91