A&D BM series Instruction Manual page 14

Installing the slide breeze break
3.1.1.
The slide breeze break improves weighing precision by reducing the negative effects from the
surrounding environment. It is installed inside the weighing chamber of the BM-20 / BM-22.
1 Determine positioning of the slide breeze break to align the slide breeze break (base) hole with the
weighing pan/pan support mounted section while pressing the sponge, located at the rear of the slide
breeze break (base), at an angle to the BM-20 or BM-22 wall surface.
2 Attach the weighing pan/pan support and he slide breeze break (door).
Attach the slide breeze
break (base) while pressing
the sponge part located at
the rear of the slide breeze
break (base) at an angle to
the wall surface.
Note 1 There may be variations in weighing results after attaching the slide breeze break as it has not
adjusted to the surrounding temperature. Wait a while before making any measurements.
Note 2 The weighing pan / pan support or small weighing pan for filter provided with the BM-20 / BM-22
can be used.
BM-20 / BM-22
Slide breeze break
（door）
Weighing pan/
Pan support
(Note 2)
Slide breeze break
（base）
Weighing pan /
pan support
(Note.2)
12
Small weighing pan
for filter
BM series