A&D BM series Instruction Manual page 107

AD-8922A: Remote controller
This option can be connected to the balance using the RS-232C interface and can control the
balance remotely. Various options such as comparator output or analog output are available.
AX-USB-9: USB converter
Adds a COM port to a personal computer.
Enables bi-directional communication between the personal computer and the balance when a
USB driver is installed
Can use serial communication software such as WinCT on a personal computer without COM ports.
An RS-232C cable is provided to connect the USB converter to the balance.
AD-1671: Anti-vibration table
Approximately 27 kg, Artificial stone (Terrazzo).
Use this table when unstable weighing is caused by vibration coming from the floor.
Use the AD-8922A remote controller to avoid a weighing error by a slight table tilt that key
operation may make.
AD-1672: Tabletop breeze break
Protects the balance from wind from sources such as air conditioning or people passing by,
thereby reducing balance weighing errors.
The transparent panel assembly consists of antistatic plastic material that protects the balance
from static electricity.
AD-1682: Rechargeable Battery
This option allows use of the balance in a place where AC power is not available.
AD-1683: DC static eliminator
This static eliminator eliminates static electricity to prevent weighing errors caused by static
electricity during measurement.
This direct current and windless type of eliminator is the most suitable for precisely weighing powder, etc.
Small size, light weight
AD-1684A: Electrostatic field meter
This option measures the amount of the static charge on the sample, tare or peripheral
equipment and displays the result.
If those are found to be charged, discharge them using the AD-1683 DC static eliminator.
AD-1689: Tweezers for calibration weight
A pair of tweezers ideally suited for holding calibration weights of 1 g to 500 g.
AD-8529PC-W: Bluetooth converter (for connecting a personal computer)
This option connects a personal computer to the balance wirelessly (via Bluetooth
Driver installation is required.
AD-8529PR-W: Bluetooth converter (for connecting a printer)
This option connects a printer to the balance wirelessly (via Bluetooth
AX-SW137-PRINT: Foot switch print function with a plug
The foot switch has the same function as the
AX-SW137-REZERO: Foot switch rezero function with a plug
The foot switch has the same function as the
BM series
.
105
key.
PRINT
key.
RE-ZERO

) up to 10 m.

) up to 10 m.