37. Re-assemble the machine in the reverse order of when the parts were removed. Put the Left Shroud in position first to align the screws for the
LEFT
Right Shroud. Install the top screws first. Be sure the tabs in the Motorized Lift Cover snap into the Side Shrouds.
SPEAKER
NOTICE: This step may require two people. Be sure not to crimp any cables.
Note: Self-tapping screws attach the Shrouds to the Frame.
38. Inspect your machine to ensure that all hardware is tight and components are properly assembled.
Do not use until the machine has been fully assembled and inspected for correct performance in accordance with the Owner's
Manual.
SERVO
SPEED
SENSOR
3
2
L
N
PWR
SWITCH
4
1
G
ON/OFF
90
WIRELESS HR MODULE
ENGINE
MCB
EARTH
GROUND
RIGHT
SPEAKER
RIGHT HANDL
LIFT MOTOR
RE
RE