Bowflex BXE116 Service Manual page 47

To reduce the risk of electrical shock or unsupervised usage of the equipment, always unplug the power cord from the
!
wall outlet and wait 5 minutes before cleaning, maintaining or repairing this machine. Place the power cord in a secure
location.
1. Using a Standard screwdriver, remove the indicated Cap (by arrow)
from the Frame Assembly.
2. Using a 6mm hex wrench, remove the indicated hardware from the
Crank Arm and Leg.
3. Remove the Leg from the Crank Arm.
4. Using a small standard screwdriver, gently pry the Cap off of the center
of the Crank Cover.
5. Using a #2 Phillips screwdriver, remove the 6 indicated screws (ovals
and arrows) from the Crank Cover.
NOTICE: To assist with re-assembly, observe that the white arrows
are the longer screws.
Crank Cover
Cap (removed from
center of Crank Cover)
47
Crank Cover