Bowflex BXE116 Service Manual page 32

To reduce the risk of electrical shock or unsupervised usage of the equipment, always unplug the power cord from the
!
wall outlet and wait 5 minutes before cleaning, maintaining or repairing this machine. Place the power cord in a secure
location.
1. Using a 6mm hex wrench, remove the indicated hardware from the
Lower Handlebar Arm and Pedal.
Be aware that the Handlebar Arm will be loose and will pivot
when the hardware is removed. Safely allow the Handlebar
Arm to pivot downward and come to rest. Be sure not to be in
the path of the Handlebar Arm.
Note: To assist with reassembly, observe how the Pivot Sleeve engages
flush with the Lower Handlebar Arm.
2. Using a small Standard screwdriver, remove the indicated Cap (by ar-
row) from the Frame Assembly.
3. Using a 6mm hex wrench, remove the indicated hardware from the
Crank Arm and Leg.
4. Using a 6mm hex wrench, loosen and remove the indicated hardware
from the Crank Arm and Leg, and set it safely aside for reassembly.
Remove the Leg and Pedal together and set them safely aside for
reassembly.
NOTICE: This step may require two people.
32