Bowflex BXE116 Service Manual page 58

34. Before fully attaching the Shrouds, power up the machine to verify
that the Magnet Arm can move freely, and that the Brake Magnet and
Flywheel do not touch at the maximum resistance level.
Machine is on. Current is active. There is risk of electrical
!
shock. Be sure to keep fingers clear of all pinch hazards
when you change the resistance level.
35. Re-assemble the machine in the reverse order of when the parts
were removed. Put the Left Shroud in position first to align the screws
for the Right Shroud. Install the top screws first. Be sure the tabs in the
Motorized Lift Cover snap into the Side Shrouds.
NOTICE: This step may require two people. Be sure not to crimp
any cables.
Note: Self-tapping screws attach the Shrouds to the Frame.
36. Inspect your machine to ensure that all hardware is tight and
components are properly assembled.
Do not use until the machine has been fully assembled and
inspected for correct performance in accordance with the
Owner's Manual.
58