5. Using a #2 Phillips screwdriver, remove the two screws that secure the
Interior Pivot Cover to the Handlebar Arm.
6. Using a 6mm hex wrench, remove the indicated hardware from the
Lower Handlebar Arm and Pedal.
Be aware that the Handlebar Arm will be loose and will pivot
when the hardware is removed. Safely allow the Handlebar
Arm to pivot downward and come to rest. Be sure not to be in
the path of the Handlebar Arm.
Note: To assist with reassembly, observe how the Pivot Sleeve engages
flush with the Lower Handlebar Arm.
7. Using two 6mm hex wrenches, remove the indicated hardware from the
Lower Handlebar Arm and the Arm Pivot Rod. The hardware on both ends
of the Arm Pivot Rod will need to be held to remove it.
Lower Handlebar Arm
67
Interior Pivot Cover
Upper Handlebar Arm