Bowflex BXE116 Service Manual page 30

14. Re-assemble the machine in the reverse order of when the parts were
removed. Put the Left Shroud in position first to align the screws for the
Right Shroud. Install the top screws first. Be sure the tabs in the Motorized
Lift Cover snap into the Side Shrouds.
NOTICE: This step may require two people. Be sure not to crimp
any cables.
15. Inspect your machine to ensure that all hardware is tight and
components are properly assembled.
Do not use until the machine has been fully assembled and
inspected for correct performance in accordance with the
Owner's Manual.
30