Bowflex BXE116 Service Manual page 84

4. Using two 6mm hex wrenches, remove the indicated hardware from the
Lower Handlebar Arm
Lower Handlebar Arm and the Arm Pivot Rod. The hardware on both ends
of the Arm Pivot Rod will need to be held to remove it.
Upper Handlebar Arm
5. Slightly pull the Handlebar Arm off the machine to expose the Cable
Connections.
6. Disconnect the Handlebar Cable from the Upper Handlebar that goes
into the Console Mast.
7. Remove the Handlebar Arm from the machine.
Interior Pivot Cover
Handlebar Cable
84