Bowflex BXE116 Service Manual page 78

3. Gently lift and remove the Console/Static Handlebar Assembly from the
Console Mast and disconnect the five cables (the Input/Output, Lift Motor,
Resistance Control, Wireless Heart Rate, and Incline Control Cables) that
come from the back of the Console.
Note: Do not let the Cables fall down inside the Console Mast. If neces-
sary, use a rubber band or wire tie to secure them. This step may require
two people.
4. Using a Standard screwdriver to gently pry, unsnap the Exterior Pivot
Covers. Place them safely aside.
Exterior Pivot Cover
78