Bowflex BXE116 Service Manual page 75

Hide thumbs Also See for BXE116:
Table of Contents

Advertisement

18. Count the number of threads showing on the Lift Motor Shaft between
the Collar Nut and the Lift Motor base, and record the number.
19. Using the 18mm socket and wrench and 18mm open end wrench,
loosen and remove the hex head bolts that attach the Incline Adjuster
Assembly to the Lift Motor shaft. Set the bolts aside for reassembly.
20. Carefully remove the old Incline Adjuster Assembly and discard.
Note: Do not rotate the Lift Motor Collar Nut on the Shaft while the Incline
Adjuster Assembly is not installed.
NOTICE: Do not crimp any cables.
21. Re-assemble the machine in the reverse order of when the parts were
removed.
Note: Be sure the number of threads showing on the Lift Motor
shaft between the Collar Nut and the Lift Motor base is the
same as the number recorded in Step 16. If the number is
different, turn the collar nut until the thread count is the same.
22. Inspect your machine to ensure that all hardware is tight and
components are properly assembled.
Do not use until the machine has been fully assembled and
inspected for correct performance in accordance with the
Owner's Manual.
Lift Motor Shaft
Lift Motor Collar
Nut
Distance between
Collar Nut and Lift
Motor Base
75

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bxe216

Table of Contents