Bowflex BXE116 Service Manual page 83

To reduce the risk of electrical shock or unsupervised usage of the equipment, always unplug the power cord from the
!
wall outlet and wait 5 minutes before cleaning, maintaining or repairing this machine. Place the power cord in a secure
location.
1. Using a Standard screwdriver to gently pry, unsnap the Exterior Pivot
Covers. Place them safely aside.
Note: This procedure shows the removal and replacement of the Left
Upper and Lower Handlebar Arm. To remove the Right Handlebar, adjust
the procedure accordingly.
2. Using a #2 Phillips screwdriver, remove the two screws that secure the
Interior Pivot Cover to the Handlebar Arm.
3. Using a 6mm hex wrench, remove the indicated hardware from the
Lower Handlebar Arm and Pedal.
Be aware that the Handlebar Arm will be loose and will pivot
when the hardware is removed. Safely allow the Handlebar
Arm to pivot downward and come to rest. Be sure not to be in
the path of the Handlebar Arm.
Note: To assist with reassembly, observe how the Pivot Sleeve engages
flush with the Lower Handlebar Arm.
83
Exterior Pivot Cover
Interior Pivot Cover