Bowflex BXE116 Service Manual page 27

To reduce the risk of electrical shock or unsupervised usage of the equipment, always unplug the power cord from the
!
wall outlet and wait 5 minutes before cleaning, maintaining or repairing this machine. Place the power cord in a secure
location.
1. With power supplied to the machine and it turned on, adjust the
Resistance to the highest setting. Allow the machine to adjust to the new
resistance level.
2. Unplug the power cord from the machine and wait 5 minutes. Place the
power cord in a secure location.
To reduce the risk of electrical shock or unsu-
!
pervised usage of the equipment, always unplug
the power cord from the wall outlet and wait 5
minutes before cleaning, maintaining or repair-
ing this machine. Place the power cord in a
secure location.
3. Using a 6mm hex wrench, remove the indicated hardware from the
Lower Handlebar Arm and Pedal.
Be aware that the Handlebar Arm will be loose and will pivot
when the hardware is removed. Safely allow the Handlebar
Arm to pivot downward and come to rest. Be sure not to be in
the path of the Handlebar Arm.
Note: To assist with reassembly, observe how the Pivot Sleeve engages
flush with the Lower Handlebar Arm.
4. Using a small Standard screwdriver, remove the indicated Cap (by ar-
row) from the Frame Assembly.
27