14. Using a small standard screwdriver, gently pry the Cap off of the
center of the Crank Cover.
15. Using a #2 Phillips screwdriver, remove the 6 indicated screws (ovals
and arrows) from the Crank Cover.
NOTICE: To assist with re-assembly, observe that the white arrows
are the longer screws.
16. Repeat steps 14-15 on the other side of the machine.
17. Using a #2 Phillips screwdriver, remove the 7 indicated screws (with
arrows) that secure the Left Shroud. Remove the bottom screws first, and
then the top screw. Slowly remove the Left Shroud.
18. Using a #2 Phillips screwdriver, remove the 3 indicated screws (with
arrows) that secure the Right Shroud. Remove the bottom screws first,
and then the top screw. Slowly remove the Right Shroud.
Cap (removed from
center of Crank Cover)
123
Crank Cover