Bowflex BXE116 Service Manual page 45

13. Using a 6mm hex wrench, remove the hardware (indicated) from the
Console Mast. Slightly pull the Mast up and disconnect the cables. Set the
hardware aside for reassembly.
NOTICE: Do not crimp the cables. Do not allow the cables to fall
down into the Main Unit or into the Console Mast. This
step may require two people.
14. Re-assemble the machine in the reverse order of when the parts were
removed.
NOTICE: Do not crimp the cables.
15. Final Inspection
Inspect your machine to ensure that all hardware is tight and components
are properly assembled.
Do not use until the machine has been fully assembled and
inspected for correct performance in accordance with the
Owner's Manual.
45