Bowflex BXE116 Service Manual page 50

To reduce the risk of electrical shock or unsupervised usage of the equipment, always unplug the power cord from the
!
wall outlet and wait 5 minutes before cleaning, maintaining or repairing this machine. Place the power cord in a secure
location.
1. Using a Standard screwdriver, remove the indicated Cap (by arrow)
from the Frame Assembly.
2. Using a 6mm hex wrench, remove the indicated hardware from the
Crank Arm and Leg.
3. Remove the Leg from the Crank Arm.
4. Using a small standard screwdriver, gently pry the Cap off of the center
of the Crank Cover.
5. Using a #2 Phillips screwdriver, remove the 6 indicated screws (ovals
and arrows) from the Crank Cover.
NOTICE: To assist with re-assembly, observe that the white arrows
are the longer screws.
6. Re-assemble the machine in the reverse order of when the parts were
removed.
7. Final Inspection
Inspect your machine to ensure that all hardware is tight and components
are properly assembled.
Do not use until the machine has been fully assembled and
inspected for correct performance in accordance with the
Owner's Manual.
Crank Cover
Cap (removed from
center of Crank Cover)
50
Crank Cover