Bowflex BXE116 Service Manual page 44

8. Slightly pull the Handlebar Arm off the machine to expose the Cable
Connections.
9. Disconnect the Handlebar Cable from the Upper Handlebar that goes
into the Console Mast.
10. Remove the Handlebar Arm from the machine.
Handlebar Cable
11. Repeat steps 5-10 on the other side of the machine.
12. Using a #2 Phillips screwdriver, remove the screws that secure the
Upper Shrouds and Tray.
Note: Be sure to observe how the Handlebar Cables route through the
Upper Shrouds to assist with re-assembly.
X4
F
X2
44