Bowflex BXE116 Service Manual page 137

14. Using a small standard screwdriver, gently pry the indicated Cap off of
the center of the Crank Cover.
15. Using a #2 Phillips screwdriver, remove the 6 indicated screws (ovals
and arrows) from the Crank Cover.
NOTICE: To assist with re-assembly, observe that the white arrows
are the longer screws.
16. Repeat steps 14-15 on the other side of the machine.
Crank Cover
17. Using a #2 Phillips screwdriver, remove the 7 indicated screws (with
arrows) that secure the Left Shroud. Remove the bottom screws first, and
then the top screw. Slowly remove the Left Shroud.
137