Bowflex BXE116 Service Manual page 109

6. Using a 6mm hex wrench, remove the indicated hardware from the
Crank Arm and Leg.
7. Remove the Leg and Pedal Assembly from the Frame Assembly.
8. Repeat steps 2-6 on the other side of the machine.
9. Place a static object (like a book or box) under the back of the main
frame but not under the Rail Assembly. The static object (*) should not be
compressible.
10. Using a 6mm hex wrench and a 13mm wrench, remove the 2 indicated
screws ( by arrow) that attach the Rail Assembly to the Incline Arm.
Be aware that the Frame Assembly may be unstable and
slightly top heavy.
11. Using a 6mm hex wrench, remove the 4 indicated screws (by ovals)
that attach the Rail Assembly to the Frame Assembly.
12. Remove the old Rail Assembly and replace with the new one.
Some components of the equipment can be heavy or
awkward. Enlist the service of a second person when you do
maintenance steps involving these components. Do not try to
do heavy or awkward steps on your own.
NOTICE: This step may require two people.
13. Re-assemble the machine in the reverse order of when the parts were
removed.
Make sure the Upper Handlebar Arms are secure before you
exercise.
Note: Remove the plastic scratch guard strips from the Rails. If neces-
sary, apply silicone lubricant to a cloth and wipe the Rails to eliminate
roller noise.
14. Final Inspection
Inspect your machine to ensure that all hardware is tight and components
are properly assembled.
Do not use until the machine has been fully assembled and
inspected for correct performance in accordance with the
Owner's Manual.
Incline Arm
109
Rail Assembly