Bowflex BXE116 Service Manual page 87

19. Using a short #2 Phillips screwdriver, remove the indicated screws (by
arrows) from the MCB Cover. Carefully remove the MCB cover.
NOTICE: Do not crimp the cables.
MCB Cover
Zip
Ties
Note: Your machine may not match the image. For reference only.
20. Using a #2 Phillips screwdriver, remove the top screw to free the Lift
Motor ground wire. Hand tighten the top screw to hold the MCB Assembly
in position on the Frame until reassembly.
Lift motor ground wire
87