To reduce the risk of electrical shock or unsupervised usage of the equipment, always unplug the power cord from
!
the wall outlet and wait 5 minutes before cleaning, maintaining or repairing this machine. Place the power cord in
a secure location.
1. Unplug the power cord from the machine and wait 5 minutes. Place the
power cord in a secure location.
2. Using a #2 Phillips screwdriver, remove the indicated screw from the
Front Stabilizer Shroud. Remove the Front Stabilizer Shroud.
3. Using a 13mm wrench and a 6mm hex wrench, remove the indicated
hardware from the Transport Wheel.
4. Using a 13mm wrench and a 6mm hex wrench, attach the new Trans-
port Wheel to the Frame Assembly.
5. Re-assemble the machine in the reverse order of when the parts were
removed.
6. Final Inspection
Inspect your machine to ensure that all hardware is tight and components
are properly assembled.
Do not use until the machine has been fully assembled and
inspected for correct performance in accordance with the
Owner's Manual.
Transport Wheel
141
Front Stabilizer Shroud