Quick Assign (Patch:s-700 Partial) Screen - Roland MV-8000 Owner's Manual

IMPORT

QUICK ASSIGN (PATCH:S-700 PARTIAL) screen

Here you can assign the S-700 series partial data to a
patch.
Explanation of each area
1. Partial Name
Displays the S-700 series partial name you want to
import.
2. Pads
Indicates the status of the pads in the current pad
bank.
Indicate Status
A partial is assigned to the pad.
Nothing is assigned.
3. Part Number
Specifies the instrument part to which you want to
assign the sampled data.
Range: 1~16
4. Assign To
Specifies the partial (note number) within the
instrument part selected by Part Number to which
the sample data will be assigned. The value at the left
specifies the lowest note, and the value at the right
specifies the highest note. The center value specifies
the original key.
Range: 1-01 (A0)~(lowest vacant note number)
~6-16 (G#8)
You can also specify the assignments by striking a
pad directly. If you strike a pad to which a sound is
already assigned, that sound will play.
• If a range of pads (note numbers) are assigned, they
370
To access this screen
➜
• (In IMPORT screen (p. 366), select
an S-700 series partial data)
will play the same partial. This means that if you
edit the partial parameters, your editing will affect
the sound of all pads that use that partial. The
PATCH EDIT (SPLIT) screen (p. 273) shows how
partials are assigned to the pads.
• The imported partial data contains information
indicating the original key. This means you don't
need to specify the original key.
5. Keyboard
Indicates how the note numbers are used.
Region
of used
Samples
note numbers
will be assigned
F-buttons
Name
Displays the EDIT NAME popup (p. 199), where you
can edit the pad name.
Set
Assigns the sample data to the specified pad.