Roland MV-8000 Owner's Manual page 92

Editing a song
Restricting the type of events that will be edited (View
Filter)
If there is a large amount of sequence data, numerous events will be displayed,
possibly making it difficult to edit. In such cases, you can use the View Filter to
restrict the types of events that will be displayed, letting you edit only the events
that are displayed.
1. In either the SEQUENCE screen, SEQUENCE EDIT screen, or
EVENT LIST screen, Press
The MENU will appear.
2. Selects View Filter and then press
The VIEW FILTER popup (p. 245) will
appear.
3. Either turn the VALUE dial or
press
check mark
you want to view (and edit).
Events with a check mark (✔) will be
displayed; events without a check
mark will not be displayed.
Message and icon
Note
Poly Aftertouch
Control Change
Program Change
Channel Aftertouch
Pitch Bend
Tune Request
Mode Message
System Exclusive
Pressing [F1 (All On)] will add a check mark to all events, and pressing [F1 (All
Off)] will remove the check mark from all events.
4. Press
The VIEW FILTER popup will close. The icon shown in the lower right of the
SEQUENCE screen indicates the View Filter status you specified.
Icon
92
.
(On/Off) to add a
✔
to the events
Explanation
Note messages; MIDI messages that indicate a note.
Polyphonic Aftertouch messages; MIDI messages that
apply aftertouch to individual keys.
Control Change messages; MIDI messages that apply
various effects such as modulation or expression.
Program Change messages; MIDI messages that select
sounds.
Channel Aftertouch messages; MIDI messages that ap-
ply aftertouch to an entire MIDI channel.
Pitch Bend messages; MIDI messages that change the
pitch.
This MIDI message causes an analog synthesizer to
tune itself.
MIDI Mode Message that changes the mode
System Exclusive messages; MIDI messages that con-
tain settings specific to the MV-8000 itself, such as
sound settings.
(Close).
Explanation
View Filter is off (events displayed)
View Filter is on (events not displayed)
.