Chop Popup - Roland MV-8000 Owner's Manual

CHOP popup

Here you can divide an audio phrase at desired
locations and assign each portion to a pad (to create a
patch). You can divide the phrase into as many as
sixteen portions.
Explanation of each area
1. Sample
Indicates the sample number and sample name that
you are editing.
2. Zoom level
Indicates the ratio at which the waveform shown in
the wave window is being magnified or shrunk.
3. Wave window
Shows the audio phrase (waveform) that you are
editing.
4. Pad
After the currently-edited sampled is divided, it will
be assigned to the pads displayed in black.
5. Point No. (Point Number)
Indicates that the location shown by the Current
Address is the "n-the" division from the beginning of
the audio phrase you are dividing. The divided
region indicated by this point number is highlighted
in the wave window.
6. Address
Indicates the position of each divided audio phrase
selected by Point No.
7. Current Point (Dividing line)
Specifies the location at which the audio phrase will
be divided. Set this value to divide the audio phrase
at the desired point. The dividing line shown in the
wave window will move according to the value you
specify as the Current Address.
To access this screen
➜ (choose the audio phrase you want to
•
edit) ➜ ➜
➜ ➜ (turn off "Auto Divide
•
parameter") ➜
➜ ➜
F-buttons
Add Point
Adds a dividing point. Its location will be the Current
Address.
You can specify up to fifteen dividing points
(sixteen divisions).
Clear Point
Deletes the current point number. To select a point
number, move the Current Address.
You cannot do this if no dividing locations are
specified, nor can you delete point number 1.
Auto Chop
The AUTO CHOP popup (p. 306) will appear.
Cancel
Closes the CHOP screen and then you will return to
before screen.
Execute
Divides the audio phrase at the dividing points you
specified, and then displays the QUICK ASSIGN
(CHOP) popup (p. 307).
AUDIO PHRASES
➜ (sampling...)
305