Copy&Paste Popup - Roland MV-8000 Owner's Manual

SEQUENCE
COPY&PASTE popup
This copies the data of the "In time -- Out time"
region to the specified location.
Explanation of each area
1. To
Specifies the copy-destination time.
Range: 0001-01-000~9999-**-***
** will depend on the time signature you set.
2. To Track
Specifies the copy-destination track number.
• To Track appears only if you are using SEQUENCE
EDIT.
• If you've selected two or more tracks, you won't be
able to select the To Track value. (The display will
indicate "Multi tracks selected.")
• Only the same type of track can be selected as a
value.
3. Times
Specifies the number of times the copy will be
repeated.
Range:
1~99
4. Mode
Selects the way in which any data existing at the
copy-destination will be handled.
Value Explanation
The data will be combined with the data
Merge
that exists at the copy-destination.
The data will replace (overwrite) the data
Replace
that exists at the copy-destination.
226
To access this screen
➜
• select a track as the current track
(
➜
or
➜
The parameters in the COPY&PASTE popup will
differ according to whether you access it from
PIANO ROLL EDIT or from SEQUENCE EDIT. In
this page we describe all the parameters that might
appear; ignore the ones that don't apply.
5.Transpose
Specifies the amount of transposition in semitone
steps. Specify a positive (+) value to raise the pitch, or
a negative (-) value to lower the pitch. A setting of 0
produces no change.
Range: -127~127
• Transpose appears only if you are using PIANO
ROLL EDIT.
• If executing this transpose operation would cause
the note number to be higher than G9 or lower than
C-1.
F-buttons
Execute
Executes the Copy operation.
You can use the VIEW FILTER popup (p. 245) to
select the events that will be copied.
➜ ➜
choose Copy&Paste
(
)
)