Track Parameter (Midi) Popup - Roland MV-8000 Owner's Manual

SEQUENCE

TRACK PARAMETER (MIDI) popup

Here you can make detailed parameter settings for a
MIDI track.
Explanation of each area
1. (Track number and track name)
This is the number and name of the track you are
editing.
You can press [F5 (Name)] to display the EDIT
NAME popup (p. 199) and edit the name of the
track.
2. Output Assign
Specifies the output destination for the data recorded
in the MIDI track.
Range: Off, 1~16
3. MIDI
Specifies the MIDI connector and channel used for
MIDI output of the data from the MIDI track.
Range: Off, A-1~A-16, B-1~B-16, R-1~R-16
4. Quantize Type
Select the type of quantization (timing correction)
that will be applied when the sequencer plays.
Value Explanation
Off Play Quantize will not be applied.
The sequence data will be adjusted toward
Grid intervals of the beat specified by the Grid
Quantize Resolution parameter.
Shuffle Quantization will be applied. Notes
will be adjusted forward or backward to-
ward intervals of the beat specified by the
Shuffle Quantize Resolution parameter, by
the amount specified by Shuffle Rate.
Shuffle
This adds a "shuffle" or "swing"
character to the rhythm.
208
To access this screen
➜ (Select a MIDI track as the current track)
•
➜
Value Explanation
A quantize template will be applied. By
choosing one of 71 quantization settings, you
can easily modify the beat in a wide variety
Template of ways. In addition to various shuffle tem-
plates, these also include templates that use
velocity to create a rhythm feel (Groove
Quantize).
5. Strength (Quantize strength)
Sets the strength of quantization that will be applied
to the notes specified by the Grid Quantize
Resolution parameters. Higher value of this
parameter will cause notes to be adjusted more
closely toward the rhythmic intervals specified by
Grid Quantize Resolution.
Range: 0~[100] %
A setting of 100 produces the strongest effect; at a
setting of 0 no correction will be applied.
6. Resolution
Specifies the quantization timing. Choose the shortest
note value that occurs in the region you want to
quantize.
Quantize
Range
Type
Grid
Shuffle
7. Shuffle Rate
When Quantize Type=Shuffle, this specifies how far
away the "backbeat" notes (relative to the Shuffle
Quantize Resolution setting) will be from the
downbeats. You can create a sense of swing by
shifting the timing of the backbeats. With a setting of
(60), (80), (120), (160),
(240), (320), (480)
(120), (240)