Roland MV-8000 Owner's Manual page 347

Production studio
Hide thumbs Also See for MV-8000:
Table of Contents

Advertisement

Explanation of each area (Input)
This divides the source signal into low, mid, and
high-frequency bands.
1. Block name (Input)
Displays the input block parameters.
2. Input Gain
Adjusts the volume before the signal enters the
expander or compressor.
Range:
-24~+12 dB
3. Detect Time
Delays the source signal that enters the expander or
compressor.
Range:
0~10 ms
4. Low Split / High Split
Specifies the frequencies at which the source signal is
divided into frequency bands. Low Split is the
frequency at which the low and mid-frequency bands
are divided. High Split is the frequency at which the
mid and high-frequency bands are divided.
Parameter
Low Split
High Split
Range
20~800 Hz
1.6~16.0 kHz
Explanation of each area (Expander)
This expands the dynamic range at a specified ratio.
1. Block name (Expander)
Displays the expander parameters.
2. Switch
Switches the expander block on/off. If you press
[F5 (Sw On/Off)], turn effect block switch on/off.
Range:
Off, On
3. Band split
You can apply the expander independently to the
high, mid, and low-frequency bands.
Band
Explanation
Parameters for the high-frequency band
High
expander
Parameters for the mid-frequency band
Mid
expander
Parameters for the low-frequency band
Low
expander
4. Threshold
Specifies the volume at which the expander starts to
apply.
Range:
-24~0 dB
5. Ratio
Specifies the proportion (source signal: output signal)
by which the expander will expand the dynamic
range. This is the proportion by which the output will
be reduced when the input level falls below the value
of the Threshold parameter.
Range:
1:1.00~1:16.0, 1:INF
6. Attack
This is the Attack Time parameter for the expander. It
specifies the time from when the volume falls below
the value of the Threshold parameter until the
expander starts to apply.
Range:
0~100 ms
7. Release
This is the Release Time parameter for the expander.
It specifies the time from when the volume exceeds
the value of the Threshold parameter until the
expander stops being applied.
Range:
50~5000 ms
MASTERING
347

Advertisement

Table of Contents
loading

Table of Contents