Roland MV-8000 Owner's Manual page 96

Editing a song
Copying data and inserting it at another location (Copy & Insert).
The Copy & Insert command inserts the copied sequence data into another track or
note number, and moves the existing sequence data backward to make room.
1.
Specify the editing region as described in Using the PIANO ROLL EDIT
screen to edit a MIDI track (p. 90) or Using the SEQUENCE EDIT screen
to edit (p. 91).
This specifies the region of sequence data that will be copied.
2.
Access the SELECT SEQUENCE EDIT COMMAND popup (p. 225), and
choose "Copy&Insert..."
The COPY&INSERT popup (p. 228) will appear.
3.
Set the parameters.
• To
Specify the new time to which the note message(s) will be copied.
• To Track
Specify the track to which the data will be copied. If you're copying more than one
track, you cannot copy to other track.
• Shift All Notes
• Shift All Tracks
If you check this item, all data following the insert location will be moved backward
according to the playback duration of the copied data.
Shift All Notes/Shift All Tracks
Overlapping data
Shift All Notes/Shift All Tracks
All data existing at the insertion time
4.
Press (Execute).
The specified region of data will be copied.
96
Insertion point
Insertion point
will be moved backward.
will be moved backward.
For details on all of the
parameters and settings for
Copy & Insert, refer to the
COPY&INSERT popup (p.
228).
The Destination Note
parameter is available if you
accessed the COPY & INSERT
popup from the PIANO ROLL
EDIT screen.
The Destination Track
parameter is available if you
accessed the COPY & INSERT
popup from the SEQUENCE
EDIT screen.