Editing A Sampled Sound; Creating An Instrument; Assigning The Patch You Want To Use To The Current Part - Roland MV-8000 Owner's Manual

Editing a sampled sound

The MV-8000 lets you play a different patch (instrument) for each of the sixteen parts.
Patches are the sounds you use to create music.

Creating an instrument

Assigning the patch you want to use to the current
part
INSTRU-
MENTS
1. Press .
The INSTRUMENTS screen (p. 265) will appear.
2. Use (up/down) to select the part to
which you want to assign a patch.
The selected part number (the current part) is
highlighted.
3. Press (Library).
The PATCH LIBRARY screen (p. 268) will appear.
4. Move the cursor to the desired patch.
5. Press (Use This).
The specified patch will be loaded.
A "patch" is a sound (or set of
sounds). On the MV-8000 you
can play a patch by striking the
pads or by playing back the
sequencer to make the patch
sound at the programmed
timing.
47