Using The Sequence Edit Screen To Edit - Roland MV-8000 Owner's Manual

Using the SEQUENCE EDIT screen
to edit
1.
Select the song you want to edit as described in Selecting the song that
you want to edit (p. 88).
2.
Press .
The SEQUENCE screen (p. 205) will appear.
3.
Press (Seq Edit).
The SEQUENCE EDIT screen (p. 222) will appear.
4.
Move the cursor to the track that you want to
edit, and press
A ■ symbol will be added to the track number,
indicating that this track is selected for editing. You
can select more than one track for editing --- simply repeat step 4.
5. Move the current time location to the beginning of the region that you want to
edit, and press
This specifies the beginning of the editing region.
6.
Move the current time location to the end of the region that you want to edit,
and press (Rgn In/Out).
This specifies the end of the editing region. Your editing operations will apply to the
region between the In and Out points you specified in steps 5 and 6.
j
Selected
tracks
7.
Press (Command).
The SELECT SEQUENCE EDIT COMMAND
popup (p. 225) will appear.
8. Use the cursor to select a command, and
press .
9. Set the parameters for the selected
command. (If you're executing the Erase or Cut command, there are no
parameters to set.)
10.
Press (Execute).
The sequence editing command will be executed.
If you're not satisfied with the results of your editing, you can press UNDO/REDO to return to
the state prior to editing. For details on the Undo function, refer to Undoing a recording or
editing operation (Undo) (p. 80).
(Track Sel).
(Rgn In/Out).
Selected
data
Editing a song
The list of editing
commands will differ
according to the screen that
is displayed. For a list of
the available commands,
refer to List of available
editing commands (p. 93).
If you selected the Erase or Cut
command, the operation will
be executed in step 8. Steps 9
and 10 are not necessary.
If you decide to leave an edit
screen without executing,
press [EXIT].
91