Storing The Current Effect Settings In The Library - Roland MV-8000 Owner's Manual

Storing the current effect settings in the
library
After you've edited the effect parameters to create your own effect settings, you can
store them in the library and recall them later when needed.
1.
Edit the effect parameters as described in Editing the effect parameters (p.
122).
2.
Press , move the cursor to Library, and press
The EFFECT LIBRARY popup (MFX/DlyCho/Reverb) (p. 374) will appear. The screen
that appears will depend on the current effect.
Current Item displayed
effect by [MENU]
MFX MFX Library
Dly/Cho Dly/Cho Library
Reverb Reverb Library
3. Turn the VALUE dial or use
which you want to store your settings.
The user area is the section of memory in which you can store your own settings. The
user area consists of the effect library numbers preceded by a "U" character.
4.
Press (Write Here).
The current effect settings will be written into the effect library number you selected.
.
Screen that appears
MFX LIBRARY screen (p. 374)
DELAY/CHORUS LIBRARY screen (p. 374)
REVERB LIBRARY screen (p. 374)
/ to select the user area number in
Using effects
For details on the number and
structure of the effect library,
refer to Libraries (p. 28).
You can't save settings in the
preset area (effect library
numbers preceded by a "P").
Once you overwrite a
library number, there's no
way to recover its previous
contents. You may want to
save the user library to disk
before you overwrite your
own settings.
123